Satellite Kit Portable Small – Caravan Camper or Travel

From $ 379.00

Caravan Vast Portable dish Kit will allow you to receive Foxtel and /or vast TV services. What’s in the box?

  • 80cm quality pressed dish
  • LNB mounting arm and clamp
  • Dual polarity twin output LNB
  • Heavy-duty quality portable tripod
  • All screws nuts and bits
  • Satlink WS-6927 Simple Satellite Signal Meter
  • RG6 Quad shield Foxtel-approved cable
  • 1 x f to f (swivel) test lead for alignment
  • TV Wall plate
Cable
Cable to hook up your new gear. Cable is sold by the meter. Please click the plus sign below to add as many meters as you need. This cable will come with the correct ends connected.
Qty:-+
Wall Plate
You need a wallplate to provide a termination point. Please select from one of the two below, choose between skirting board or flush wall mount (wall plate).
Categories: , , SKU: Vast kit portable Tag:

Description

The Hot Item is a portable satellite dish kit designed for caravans and travel, featuring a quality made 80cm diameter dish suitable for the eastern seaboard and inland Australia. This durable kit includes a patented double rolled edge, galvanized steel reflector, and premium hardware, along with a high gain dual polarity LNB for optimal performance. Essential components like the VAST Satellite Receiver ALTECH DSD 5000 RV Twin Tuner, meters of pre-terminated RG6 Quad Cable, and a SatLink SK-3200 digital satellite finder are also included. The ruggedized design ensures reliability on the road, making it a perfect solution for staying connected while traveling.

The R80P is a single-pack 80cm dish for KU band satellite reception. The R80P is an offset satellite dish made from heavy-duty galvanised steel with a durable polyester powder coat finish. The dishes are suitable for the reception of VAST, Pay TV, and other available KU band satellite services between 10.7 GHz and 12.75 GHz.

  • Single pack 80cm offset KU band satellite reception dish
  • Rolled edges for added strength
  • Gain of 39.7dB at KU band 12.75GHz
  • Compatible with satellite mount diameters 38 to 50mm
  • Made from galvanised steel with a polyester powder coat finish for high durability
  • Azimuth adjustment 0~360° and elevation adjustment 15~75°

For use with your satellite dish, this is a dual output, dual polarity (horizontal/vertical) LNBF that receives the signal for Vast TV and Fox. High Gain Dual Polarity 10.7GHz LO Ku Band LNBs. Higher gain and new ultra-compact design.

  • Outputs 2
  • Input Frequency Range 11.7GHz to 12.75GHz
  • Output Frequency Range 1000MHz to 2050MHz L.O. Frequency 10.7GHz L.O.
  • Accuracy Initial Accuracy (@ 25°C): ±1MHz L.O.
  • Temperature Drift -30oC to +60oC: ±1.5MHz L.O.
  • Phase Noise @ IKHz Offset: -60dBc/Hz @ I0KHz Offset: -80dBc/Hz @ I00KHz Offset: -95dBc/Hz Noise Figure @ 25°C: 0.7dB (typ.)
  • Conversion Gain @ 25°C: 60dB to 72dB
  • Image Rejection 40dB min.
  • Output VSWR 2.0:1 Cross-Pole Isolation 20dB min.
  • Supply Voltage Vertical Polarisation: 10.5V to 14.5V Horizontal Polarisation: 15.5V to 21.0V Current consumption 100mA max. 115mA max.
  • Load Impedance 75Ohm Reflector Type Offset F/D Ratio 0.6 Feedarm
  • Mount 40mm Ø
  • Storage Temperature -30°C to +60°C
  • Output Connector 75Ω F type
  • Gain Flatness 6dBpp (typ.) / entire band 1.5dBpp (typ.) / 27MHz L.O.
  • Spurious -30dBm max.

High quality solid construction with bubble level and adjustable wing nuts also peggable to secure to the ground.

The Satlink WS-6927 is the simpliest satellite signal meter on the market. It comes pre-loaded with 5 frequencies of the most commonly used satellites in Australia. A simple press of the button cycles through the different settings. It comes with an inbuilt battery, so there’s no need to connect long cables to a satellite receiver. You’ll simply only need a cable from the meter to LNBF.
This meter is suitable for VAST, Foxtel, Religious and Foreign TV Services on Optus D2, RAI & RTP C-Band on Asiasat5.

Features
Signal Strength and Quality Readings
Sound and Light Alarm when signal is locked
LNBF Short protection

What’s in the box?
1 x Satlink WS-6927 Meter
1 x 12V 1A Power Supply
1 x USB Cable
1 x User Manual (on a CD)

Specifications
Connector: F Type
Input Frequency: 950-2150MHz
Signal Input Level: -65 to -25dBm
LNB Voltage Supply: 13/18VDC 300mA max
Battery: 7.4V/500mAh Li-ion
Adaptor: 12VDC 1A PSU
Power Consumption: 0.5W Max
Size: 8x13x3cm
Weight: 0.25kgs

The Vast Satellite Dish Kit comes with pre-terminated RG6 Quad Cable which is for the vast system. This cable will come with the correct ends connected.

Additional information

Weight 23 kg
Dimensions 80 × 80 × 17 cm