Test Meter Vast TV Satlink WS-6927
Description
This Vast Satellite 6-piece home kit will set you up with every you need to allow you to receive Foxtel (with your own Foxtel decoder) and VAST TV satellite services. The 80cm Diameter is more than sufficient for most of the eastern seaboard and inland areas, to the deep west. Below is a summary of six products included in this kit. Rest assured this is top-quality gear and better than most kits you can purchase online. Note: there is a fair degree of human intervention regarding packing and cable preparation etc, that is built into the price plus the support when needed.
The R80P is a single-pack 80cm dish for KU band satellite reception. The R80P is an offset satellite dish made from heavy-duty galvanised steel with a durable polyester powder coat finish. The dishes are suitable for the reception of VAST, Pay TV, and other available KU band satellite services between 10.7 GHz and 12.75 GHz.
- Single pack 80cm offset KU band satellite reception dish
- Rolled edges for added strength
- Gain of 39.7dB at KU band 12.75GHz
- Compatible with satellite mount diameters 38 to 50mm
- Made from galvanised steel with a polyester powder coat finish for high durability
- Azimuth adjustment 0~360° and elevation adjustment 15~75°
For use with your satellite dish, this is a dual output, dual polarity (horizontal/vertical) LNBF that receives the signal for Vast TV and Fox. High Gain Dual Polarity 10.7GHz LO Ku Band LNBs. Higher gain and new ultra-compact design.
- Outputs 2
- Input Frequency Range 11.7GHz to 12.75GHz
- Output Frequency Range 1000MHz to 2050MHz L.O. Frequency 10.7GHz L.O.
- Accuracy Initial Accuracy (@ 25°C): ±1MHz L.O.
- Temperature Drift -30oC to +60oC: ±1.5MHz L.O.
- Phase Noise @ IKHz Offset: -60dBc/Hz @ I0KHz Offset: -80dBc/Hz @ I00KHz Offset: -95dBc/Hz Noise Figure @ 25°C: 0.7dB (typ.)
- Conversion Gain @ 25°C: 60dB to 72dB
- Image Rejection 40dB min.
- Output VSWR 2.0:1 Cross-Pole Isolation 20dB min.
- Supply Voltage Vertical Polarisation: 10.5V to 14.5V Horizontal Polarisation: 15.5V to 21.0V Current consumption 100mA max. 115mA max.
- Load Impedance 75Ohm Reflector Type Offset F/D Ratio 0.6 Feedarm
- Mount 40mm Ø
- Storage Temperature -30°C to +60°C
- Output Connector 75Ω F type
- Gain Flatness 6dBpp (typ.) / entire band 1.5dBpp (typ.) / 27MHz L.O.
- Spurious -30dBm max.
Secure and Versatile Satellite Tin Roof Mounting Solution: Built in Australia with high-quality BlueScope steel, this flexible mount offers adjustable stay bars (0.8 to 1.4 meters) for a perfect fit. The included fixing kit provides everything you need for a reliable installation, featuring self-tapping screws to secure the stay bars, durable metal roof screws, and weatherproofing washers for lasting protection. Whether you’re a professional or a DIY enthusiast, this robust mount is ideal for a wide range of satellite systems, including Starlink (with our adaptors), VAST, and Foxtel. Its thick steel construction and 45mm OD (38.3mm ID) pipe ensure it can withstand even the toughest weather conditions.
1-year Manufacturers warranty with support and solutions. New model with led channel display! the vast service is pretty much Australia-wide, grab this box and get access.
- Altech DSD 5000 Compact – only 225 L x 42 H x 135 D mm, perfect for caravans
- HDMI Cable, remote control, and smart card are all included.
- Ready to record – support and ready to convert into a PVR unit with an external USB2.0 storage device
- Twin Tuner function – with dual DVB-S2 tuners you will never miss your favorite show again
- Made for Australian conditions – ruggedized design and construction to suit the harsh Australian environment
- Dual Power operation (12V DC/ 240V) is perfect for homes or caravans and motor homes
- Remote control IR extender on F Connector – for discreet installation. (optional)
- Accesses free-to-air TV channels and Radio stations from almost anywhere in Australia
- Hybrid Broadband TV (HbbTV) Australian Profile ready with all key software features to support Freeview Plus
- Decodes High Definition HEVC / MPEG 2 & MPEG4 and Dolby Digital audio
- Closed caption subtitles
- The electronic Program Guide (EPG) simplifies program access
- Software developed in Australia and optimized for Australian viewers
- Secure Boot Processor Core
- IRDETO secure silicon conditional access
- Firmware is upgradeable via USB and Over The Air
- Altech VAST certified – and built for Optus Aurora Digital platform.
- The magic eye Remote Extender for DSD5000 Decoder is available separately
Also, the backup support for this product is exceptional, fast, and efficient. You only need to register the box with vast and you are off. Support is a phone call away.
The Satlink WS-6927 is the simpliest satellite signal meter on the market. It comes pre-loaded with 5 frequencies of the most commonly used satellites in Australia. A simple press of the button cycles through the different settings. It comes with an inbuilt battery, so there’s no need to connect long cables to a satellite receiver. You’ll simply only need a cable from the meter to LNBF.
This meter is suitable for VAST, Foxtel, Religious and Foreign TV Services on Optus D2, RAI & RTP C-Band on Asiasat5.
Features
Signal Strength and Quality Readings
Sound and Light Alarm when signal is locked
LNBF Short protection
What’s in the box?
1 x Satlink WS-6927 Meter
1 x 12V 1A Power Supply
1 x USB Cable
1 x User Manual (on a CD)
Specifications
Connector: F Type
Input Frequency: 950-2150MHz
Signal Input Level: -65 to -25dBm
LNB Voltage Supply: 13/18VDC 300mA max
Battery: 7.4V/500mAh Li-ion
Adaptor: 12VDC 1A PSU
Power Consumption: 0.5W Max
Size: 8x13x3cm
Weight: 0.25kgs
The Vast Satellite Dish Kit comes with pre-terminated RG6 Quad Cable which is for the vast system (1 Cable needed)
