Extra large heavy-duty fixed design suitable for both flat and curved panel configurations from 60″ to 100″. Heavy-duty 100KG load rating to support large commercial screens. Open architecture design allows easy accommodation of larger recessed hubs for cable management
$ 129.00 inc GST
Extra large heavy-duty fixed design suitable for both flat and curved panel configurations from 60″ to 100″. Heavy-duty 100KG load rating to support large commercial screens. Open architecture design allows easy accommodation of larger recessed hubs for cable management
Tilt mount wall bracket 32-55 inch with 448mm wall mounting backplate. Tilt-adjustable 0 to +10 degrees to compensate for high mounting positions. Heavy-duty 50kg load rating
$ 40.76 inc GST
Tilt mount wall bracket 32-55 inch with 448mm wall mounting backplate. Tilt-adjustable 0 to +10 degrees to compensate for high mounting positions. Heavy-duty 50kg load rating
Slimline cables are suited for installations with limited space, such as installation behind flush-mounted screens or shallow depth cabinets. Resolutions up to 4K 2K@60Hz with 24bit RGB/YCbCr 4:4:4. ARC (Audio Return Channel), CEC (Consumer Electronics Control) control technology
$ 15.99 inc GST
Slimline cables are suited for installations with limited space, such as installation behind flush-mounted screens or shallow depth cabinets. Resolutions up to 4K 2K@60Hz with 24bit RGB/YCbCr 4:4:4. ARC (Audio Return Channel), CEC (Consumer Electronics Control) control technology
Hermetically sealed balun to prevent water and dust ingress. 4G/5G filtering built in with up to 80dB rejection in the 700MHz band. Fully assembled ready to install to save on installation time
$ 89.00 inc GST
High Gain Digital TV Antenna FM + VHF (6-12)
Hermetically sealed balun to prevent water and dust ingress. 4G/5G filtering built in with up to 80dB rejection in the 700MHz band. Fully assembled ready to install to save on installation time
Dustproof, anti light interference and visible smoke detecting. Operating Voltage: 12V DC Standard Current under 5mA Alarm Current under 35mA 20m² Detecting Range LED Frequency: 32 sec/time LED on and Relay for Output Dimension: 110mm(D) x 60mm(H)
$ 139.00 inc GST
Dustproof, anti light interference and visible smoke detecting. Operating Voltage: 12V DC Standard Current under 5mA Alarm Current under 35mA 20m² Detecting Range LED Frequency: 32 sec/time LED on and Relay for Output Dimension: 110mm(D) x 60mm(H)
The ISIS satellite siren features two high intensity strobe lights and a high volume electronic siren. Made from a high impact Polycarbonate non rusting housing Built in rechargeable backup battery Tamper protection Siren Output: 118dB
$ 89.00 inc GST
The ISIS satellite siren features two high intensity strobe lights and a high volume electronic siren. Made from a high impact Polycarbonate non rusting housing Built in rechargeable backup battery Tamper protection Siren Output: 118dB
A sleek and unobtrusive alternative to a standard siren cover and strobe. Weatherproof Design 4 wire connection without tamper/ 6 wire connection with tamper Siren volume: 115dB @1m Dimensions: 210x130x78mm
$ 28.60 inc GST
A sleek and unobtrusive alternative to a standard siren cover and strobe. Weatherproof Design 4 wire connection without tamper/ 6 wire connection with tamper Siren volume: 115dB @1m Dimensions: 210x130x78mm
The Nidac CT1 Series 3 Control Timer has 13 different operating modes and 4 timing ranges, 3 trigger modes, dual DC voltage operation & a heavy-duty relay output. 12 to 24V DC operation Accurate DIP switch selection for timing Selectable positive, negative or dual edge trigger Only 70x57x23.5mm including feet 70x45x19.5mm without feet LED indicates operation
$ 49.00 inc GST
The Nidac CT1 Series 3 Control Timer has 13 different operating modes and 4 timing ranges, 3 trigger modes, dual DC voltage operation & a heavy-duty relay output. 12 to 24V DC operation Accurate DIP switch selection for timing Selectable positive, negative or dual edge trigger Only 70x57x23.5mm including feet 70x45x19.5mm without feet LED indicates operation
Ness LUX Radio PIR is a unique wireless motion detector with a white LED night-light especially designed for the latest generation of Ness radio control panels. 15m x 15m detection coverage Look-down creep zone High RF immunity White light immunity Adjustable range and pulse count Extremely long battery life, up to 10 years
$ 114.95 inc GST
Ness LUX Radio PIR is a unique wireless motion detector with a white LED night-light especially designed for the latest generation of Ness radio control panels. 15m x 15m detection coverage Look-down creep zone High RF immunity White light immunity Adjustable range and pulse count Extremely long battery life, up to 10 years
Now boasting a QUAD Element Pyro Sensor it has a better detection rate and higher noise immunity for lower false alarms. Quad element pyro sensor Adjustable Pulse Count High R.F. and E.S.D. immunity 15x15m wide angle coverage
$ 45.00 inc GST
Now boasting a QUAD Element Pyro Sensor it has a better detection rate and higher noise immunity for lower false alarms. Quad element pyro sensor Adjustable Pulse Count High R.F. and E.S.D. immunity 15x15m wide angle coverage
The Quantum 360 ceiling mount detector, for complete and reliable 360° coverage. Provides coverage of 12m diameter at floor level when installed on a standard 2.4m ceiling. Detection zones: 34 Dual element zones Coverage: 12.8x8m Mounting height: 2.1m to 5m Superior false alarm protection Adjustable range (Hi-Lo Shunt) Selectable pulse count (1-2, 3-4)
$ 49.90 inc GST
The Quantum 360 ceiling mount detector, for complete and reliable 360° coverage. Provides coverage of 12m diameter at floor level when installed on a standard 2.4m ceiling. Detection zones: 34 Dual element zones Coverage: 12.8x8m Mounting height: 2.1m to 5m Superior false alarm protection Adjustable range (Hi-Lo Shunt) Selectable pulse count (1-2, 3-4)
Accidental press protection Fully remote configurable through App IP54 daily environment protection Frequency hopping against jamming for reliable transmission
$ 33.50 inc GST
Accidental press protection Fully remote configurable through App IP54 daily environment protection Frequency hopping against jamming for reliable transmission
2000 users Backlit keypad LED indicator (Green/Yellow/Red) Wiegand 26 input for the connection of an external reader Adjustable door output time, alarm time and door open time Built in light dependent resistor for anti-tampering Built in buzzer
$ 169.00 inc GST
2000 users Backlit keypad LED indicator (Green/Yellow/Red) Wiegand 26 input for the connection of an external reader Adjustable door output time, alarm time and door open time Built in light dependent resistor for anti-tampering Built in buzzer
Suits indoor / outdoor installations Durable and stylish satin-chrome 8-26V DC operation Outputs both Wiegand and Presco™ data Compatible with Presco™ controllers
$ 269.00 inc GST
Suits indoor / outdoor installations Durable and stylish satin-chrome 8-26V DC operation Outputs both Wiegand and Presco™ data Compatible with Presco™ controllers
Detects visitors, customers and intruders passing through various points of entry. Transmits an invisible IR beam Simple D.I.Y. installation Warning buzzer AC/DC 9V Adaptor (included)
$ 79.00 inc GST
Detects visitors, customers and intruders passing through various points of entry. Transmits an invisible IR beam Simple D.I.Y. installation Warning buzzer AC/DC 9V Adaptor (included)
Serial cable for direct connect programming of the D8x and D16x with a PC and NessComms. Connects to the “serial” header on the D8x or D16x and to the serial port on a laptop or PC
$ 13.75 inc GST
Serial cable for direct connect programming of the D8x and D16x with a PC and NessComms. Connects to the “serial” header on the D8x or D16x and to the serial port on a laptop or PC
An industry-standard wall plate non-fade quality item, It provides Female to IEC Female outlet plate connectivity. It is a fixed outlet plate with a return loss of >10dB. The unit is fully shielded and can be a great choice for those looking for a unit suited for domestic PAL installations. The unit’s exterior features a glossy finish.
$ 59.07 inc GST
F’ Female To IEC Female Outlet Plate x 10
An industry-standard wall plate non-fade quality item, It provides Female to IEC Female outlet plate connectivity. It is a fixed outlet plate with a return loss of >10dB. The unit is fully shielded and can be a great choice for those looking for a unit suited for domestic PAL installations. The unit’s exterior features a glossy finish.
Stay seamlessly connected on the water with the Starlink Marine Mount, exclusively engineered for the maritime sector. This robust mount is perfect for securing your Starlink to your boat, ensuring a stable and safe connection throughout your journey. Made from UV-resistant ASA plastic, it’s built to withstand the corrosive marine environment and the harsh Australian sun, providing a reliable fixture for your satellite dish.
$ 110.00 inc GST
Stay seamlessly connected on the water with the Starlink Marine Mount, exclusively engineered for the maritime sector. This robust mount is perfect for securing your Starlink to your boat, ensuring a stable and safe connection throughout your journey. Made from UV-resistant ASA plastic, it’s built to withstand the corrosive marine environment and the harsh Australian sun, providing a reliable fixture for your satellite dish.
Secure the Gen 3 (V4) Power supply and prevent the unit from bouncing around and causing damage. Screw-on or double-sided tape mounting in your caravan or canopy:Designed to be affixed to the wall of your van using screws or an adhesive.
$ 40.00 inc GST
Secure the Gen 3 (V4) Power supply and prevent the unit from bouncing around and causing damage. Screw-on or double-sided tape mounting in your caravan or canopy:Designed to be affixed to the wall of your van using screws or an adhesive.
Securely flat mount your Starlink Gen 3 dish to your roof rack using this 3 point contact system. The center bracket bolts into the T Slot roof rack with included stainless bolts and nylon nuts.
$ 170.00 inc GST
Securely flat mount your Starlink Gen 3 dish to your roof rack using this 3 point contact system. The center bracket bolts into the T Slot roof rack with included stainless bolts and nylon nuts.
