Satellite dish kit vast-fox

$ 225.00 inc GST

This 65cm Diameter Satellite dish  is sufficient for most of the eastern seaboard.

Categories: , SKU: 65TRMLNB2x15M

Description

This Satellite dish kit vast-fox this dish configuration will allow you to receive Foxtel and vast tv satellite services. 65cm Diameter is sufficient for most of the eastern seaboard. All you need is some RG6 quad cable,which is included in this deal!

THE DISH

Patented double rolled edge. Galvanized steel reflector. Charcoal color, powder coat finish. Stainless steel hardware. Az/EI mount type with 360° Azimuth Alignment. 40mm LNB clamp included.

Now available with a quick-release detachable LNB arm for portable use.

  • Reflector: Offset
  • Aperture Efficiency: >80%
  • Horizontal Axis: 65cm
  • Vertical Axis: 74cm
  • Gain @ 12.5GHz: 37.6dB
  • Focal Length: 32.5cm
  • F/D Ratio: 0.5
  • Elevation Alignment: 15° – 85°
  • Pole Diameter: 30 – 48mm
  • Operation Wind: 80Km/h
  • Survival Wind: 180Km/h

The lnb

  • High Gain Dual Polarity 10.7GHz LO
    Ku Band LNBs
    • Higher gain
    • New ultra-compact design
    AIL107SH
    Single
    AIL107TH
    Twin
    Outputs 1 2
    Input Frequency Range 11.7GHz to 12.75GHz
    Output Frequency Range 1000MHz to 2050MHz
    L.O. Frequency 10.7GHz
    L.O. Accuracy Initial Accuracy (@ 25°C): ±1MHz
    L.O. Temperature Drift -30oC to +60oC: ±1.5MHz
    L.O. Phase Noise
    @ IKHz Offset: -60dBc/Hz
    @ I0KHz Offset: -80dBc/Hz
    @ I00KHz Offset: -95dBc/Hz
    Noise Figure @ 25°C: 0.7dB (typ.)
    Conversion Gain @ 25°C: 60dB to 72dB
    Gain Flatness
    6dBpp (typ.) / entire band
    1.5dBpp (typ.) / 27MHz
    L.O. Spurious -30dBm max.
    Image Rejection 40dB min.
    Output VSWR 2.0:1
    Cross-Pole Isolation 20dB min.
    Supply Voltage
    Vertical Polarisation: 10.5V to 14.5V
    Horizontal Polarisation: 15.5V to 21.0V
    Current consumption 100mA max. 115mA max.
    Load Impedance 75Ohm
    Reflector Type Offset
    F/D Ratio 0.6
    Feedarm Mount 40mm Ø
    Storage Temperature -30°C to +60°C
    Output Connector 75Ω F type

The Flexy Mount tin roof / or Portable tripod

Flexible roof mounts with stay bars that adjust in length between .8 and 1.4 meters. The fixing kit includes self-tapping screws to lock stay bars, metal roof screws, and weather proofing washers.

*Stay bars shown at minimum length and without locking screws.

The portable tripod is an extra $99 has a level built-in and adjustable legs, great for the traveler 

The Cable

Rg6 Quad Sheild 30 meters total!

2 x 15-meter lengths pre-made with fittings on ends.

 

If this product doesn’t suit your needs, check out our range of satellite dishes here.

Additional information

Weight23 kg
Dimensions80 × 80 × 15 cm